Last update: Monday 4 September 2017

Home > Trucks > bug-e

bug-e

Friday 25 July 2014, by vasya


See it online

Technical data

Scale (wheels used)
Width - studs
Total Weight - grams
Transmission 4x4
Motorization 1 motor(s) - RC

working fake motor
Steering motor

without steering wheel
Onboard Battery Box PFS AAA Battery Box

The 4wd Lego buggy model. The goal was to build a buggy with 68.7x34R wheels and with the narrowest track. The following technical solutions are used:
- # One buggy-motor is powerd by two parallel plugged PF battery boxes via two IR receivers.
- # Front and rear axels are connected to the shock absorbers withe the L-bar.
The PF servo is used for steering.
There is no differential gear. Both motors are mounted on the chassis.
A short snow test-drive video (the temperature is -18C). The was very sunny and the IR link was not very stable.






View online : see it on youtube

Any message or comments?

Forum registration required

You must be registered before participating in this forum. Please enter your personal identifier . If you have not yet registered, you must register.

Connectionregisterpassword forgotten?